SPACER LOWER 4 IN WASH PIPE TDS VARCO 30123436 (OILWELL EQUI
2015-07-27 07:17 Click:times
Description | Quantity | Unit |
OILFIELD EQUIPMENT- WASHER LOCK HI COLLAR VARCO (P/N :51108-C) | 8 | NOS |
OILFIELD EQUIPMENT- KEY.50 SQUARE X 2.8 1018STL VARCO (P/N : 16532) | 2 | NOS |
OILFIELD EQUIPMENT- CAPSCREW SOCKET HEAD VARCO (P/N : 50108-16-C) | 8 | NOS |
OILFIELD EQUIPMENT- CAPSCREW SOCKET HEAD UNC VARCO (P/N : 50108-10-C) | 8 | NOS |
OILFIELD EQUIPMENT- CAPSCREW HEX HEAD DRILLING VARCO (P/N : 50008-7-C5D) | 4 | NOS |
OILFIELD EQUIPMENT-- CLAMP HOSE RUBBER LINED VARCO (P/N : 980267-8) | 24 | NOS |
INSERT KIT FOR INSERT CARRIER 9-5/8 IN VARCO 51202270-963 PART NO.2656 (OILWELL EQUIPMENT) | 1 | NOS |
OILFIELD EQUIPMENT- O RING - MOTOR HOUSING: VARCO; 51300-458-B | 6 | NOS |
OILFIELD EQUIPMENT- SEAL, LIP, PINION VTN, FOR TDS35 MECHANICAL TOP DRIVE MOTOR, VARCO APPLICATION | 3 | NOS |
GOODS BEING IMPORTED FOR PETROLEUM OPERATION: DIE, VARCO, 30174222, UPPER, PACKAGE, F/ST-80 WRENCH(MEXICO) | 15 | NOS |
OILWELL SUPPLIES: VARCO BJ WASHER, FLAT 50808-R-C (QTY:2 NUM) | 0.01 | KGS |
PIIN, RETAINING, VARCO P / N 30122165 | 2 | NOS |
BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 85974-6 FOR 5 IN DRILL PIPE WITH ID OF 7.50 | 1 | NOS |
SWITCH,TEMPERATURE TURE TF 165,VARCO P/N 30151888-D | 1 | NOS |
2 NUM PIN, ROLL, FOR SAFETY CLAMP, VARCO P/N 51604-18 | 2 | KGS |
GOODS BEING IMPORTED FOR PETROLEUM OPERATION: LIFTER, VARCO, 50001130, 2 WAY, BOWL, COMPLETE ASSY (NETHERLAND) | 1 | NOS |
BEARING, VARCO, 9942320, SPHERICALLINK-TILT (USA) | 3 | NOS |
O-RING, FOR VARCO 750TDS TOP DRIVE | 2 | NOS |
SEAL, VARCO P/N H7918599012 | 8 | NOS |
GOODS BEING IMPORTED FOR PETROLEUM OPERATION: GEAR-LOW, VARCO, 116624, COMPOUND, F/TDS-4H | 1 | NOS |
SHAFT,VARCO,11276,GEAR,HIGH,F/TDS-4H(USA) | 1 | NOS |
SCREW,VARCO,5000810C5D,CAP-HEX,HD,DRILLED(USA) | 6 | NOS |
94518-23HN VARCO CARTRIDGE (OILWELL EQUIPMENT SPARES) | 6 | NOS |
94518-23HN VARCO BJ CRTRIDGE (OILWELL EQUIPMENT SPARES) | 6 | NOS |
OILFIELD EQUIPMENT- INSERT VARCO 5.500 IN X 5.500 IN (P/N : AA-0508-0508-0) | 164 | NOS |
RING, LABYRINTH FOR VARCO 750 TDS TOP DRIVE | 4 | NOS |
SPACER, MAIN STEM FOR VARCO TOP DRIVE | 4 | NOS |
ISOLATOR, UPPER BEARING, LARGE FOR VARCO 750 TON TDS, | 1 | NOS |
CLAMP, SAFETY 8 IN TO 9-1/4 IN TYPE MP-R VARCO | 1 | NOS |
CYLINDER ALIGNMENT 4 IN VARCO PART NO. 30174223 (OILWELL EQUIPMENT) | 1 | NOS |
SWITCH PRESSURE VARCO (P/N#203016) (OILWELL EQUIPMENT) | 1 | NOS |
VALVE SOLENOID ATOS VARCO (P/N#112554-J2-BT) (OILWELL EQUIPMENT) | 1 | NOS |
OIL WELL SPARES. KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ | 6 | PCS |
OILWELL SUPPLIES: WASHPIPE, ASSY TDS VARCO (QTY:1 NOS) | 151.8 | KGS |
5 KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ | 15 | KGS |
3 KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: | 15 | KGS |
385015, VARCO-E EXTERNAL PHOTOCELL - (FOR TRAFFIC CONTROL EQUIPMENT) | 6 | NOS |
1 NUM JAW, LUG, ASSEMBLY, 3-1/2"-8-1/4", FOR MANUAL TONG TYPE HT65, VARCO P/N 200546-1 | 41.15 | KGS |
1 NUM JAW, LUG, ASSEMBLY, 3-1/2"-8-1/4", FOR MANUAL TONG TYPE HT65, VARCO P/N 200546-1 | 41.15 | KGS |
OILFIELD EQUIPMENT RING.GUIDE,TORQUE TUBE,VARCO P/N 90843 | 1 | NOS |
PIN-HINGE, VARCO, 2525, DC/CMSXL (MEXICO) | 3 | NOS |
SEGMENT, VARCO, 2570, INTERMEDIATE, DCS-S DRILL COLLAR SLIPS, 4X4 7/8 (MEXICO) | 2 | NOS |
SLIP, VARCO, 2569, DCSS, LEFT, SEGMENT (MEXICO) | 2 | NOS |
SEGMENT, VARCO, 2568, RIGHT, F/ DCS-S 4X4 7/8 SLIPS (MEXICO) | 2 | NOS |
SEGMENT, VARCO, 2554, RIGHT, F/ DCS-R SLIPS (MEXICO) | 2 | NOS |
VARCO PNEUMATIC SAFETY SPINNING WRENCH MODEL SSW-40 FOR 3-1/2" - 9-1/2" OD D/P & D/C COMPLETE WITH VERTICAL POSITIONING | 1 | NOS |
MDL,ISMI, MASTER - SPARES FOR ADVANCE INSTRUMENTATION SYSTEM, MAKE:NATIONAL OILWELL VARCO CONSISTING WITH (INV NO 405000 | 1 | NOS |
USED OILWELL EQUIPMENT GUIDE, TOP 13-3/8 IN, 14 IN 35 0/500/750 TON VARCO 18419-5(1 SET = 2PCS) | 1 | SET |
USED OILWELL EQUIPMENT - GUIDE, BOTTOM ELEVATOR 7-5/8 IN 350/500 TON VARCO 11792 | 1 | SET |
USED OILWELL EQUIPMENT - SLIPS, ELEVATOR 14 500 TON VARCO 7-5/8 | 4 | SET |
GASKET, SEAL RETAINER, VARCO P/N 75981(SL NO 2/24 OF LIST 13) | 4 | NOS |
KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ | 3 | NOS |
INSERT SET,VARCO 2170-54 | 1 | SET |
GOODS BEING IMPORTED FOR PETROLEUM OPERATION: SLIP, VARCO, 15520, 5-1/2 IN, SLIP-ASSEMBLY, SDXL, WITH 5 IN INSERTS (MEXI | 1 | NOS |
KIT, VARCO, 217054, SDXL/SDL (MEXICO) | 2 | NOS |
OILWELL DRILLING RIG SPARES : 2013R-1138:VARCO 500 TON ON SL 14 TYPE CASING ELEVATOR/SPIDER LESS SLIPS WITH COVER,AIR MA | 2 | PCS |
VALVE, REDUCING, PRESSURE, PLS, VARCO[SL.NO.24/24 OF LIST 13] | 1 | NOS |
ASSEMBLY, HOSE, FOR TORQUE WRENCH, VARCO DSS (HOU) P/N 58592N170017 [PO NO: 0001067755] (QTY. 1 NOS) | 0.47 | KGS |
LOOP, SERVICE, HYDRAULIC, COMPLETE, VARCO P/N 108593-37-10-3 [S.L. NO. 2/24 OF LIST 13] | 1 | NOS |
ROLLER, IDLER, VARCO P/N 83680 [S.L. NO. 2/24 OF LIST 13] | 2 | NOS |
OILFIELD EQUIPMET- KEY 16 X 10 X 70 MM VARCO (P/N # 30160617) | 4 | NOS |
OILFILED EQUIPMENT- SEAL ASSEMBLY VARCO (P/N # 30160666-4) | 4 | NOS |
OILFIELD EQUIPMENT- RING SLIDE VARCO (P/N # 30160745) | 4 | NOS |
OILFIELD EQUIPMENT- BEARING ROLLER VARCO (P/N # 30160731) | 4 | NOS |
OILFIELD EQUIPMENT- SEAL ASSEMBLY VARCO (P/N # 30160666-2) | 4 | NOS |
OILFIELD EQUIPMENT- SLIDE RING VARCO (P/N # 30173757) | 4 | NOS |
OILFIELD EQUIPMENT- ROLLER KNURLED VARCO (P/N # 30160614) | 4 | NOS |
OILFIELD EQUIPMENT- HOSE HYDRAULIC VARCO (203276-1) | 6 | NOS |
OILFIELD EQUIPMENT- PIN DOOR LEVER VARCO (P/N # 203244) | 2 | NOS |
OILFIELD EQUIPMENT- DISC VARCO (P/N # 203227) | 2 | NOS |
OILFIELD EQUIPMENT- DISC LEVER PIN VARCO (P/N # 203245) | 2 | NOS |
OILFIELD EQUIPMENT- RING PUSH BEARING VARCO (P/N # 30160397) | 4 | NOS |
OILWELL DRILLING RIG TOOLS : TEST KIT BX ELEVATOR + PS VARCO (P/N# 202539) | 1 | NOS |
WASHER, 3/8" STAINLESS STEEL, VARCO SHAFFER P/N 80-20528(SL NO 2/24 OF LIST 13) | 24 | NOS |
HYDRAULIC PRESSURE GUAGE F/HPU MAKE VARCO (P/N: 83418) | 2 | PCS |
KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ | 4 | NOS |
CONNECTOR, PRESSURE GUAGE, VARCO BJ(SL NO 2/24 OF LIST 13) | 2 | NOS |
KIT, REPAIR, FOR BIAS SEQUENCING VALVE, (1003050 1003051). VARCO SHAFFER P/N 9910300[S.L. NO. 2/24 OF LIST 13] | 2 | NOS |
OILWELL EQUIPMENT I NUM BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 859 74-6 FOR 5 IN | 33 | KGS |
PIN VARCO SW HINGE PIN F/ST 80 IRON ROUGHNECK (P/N: 301606120) | 1 | PCS |
RING VARCO SLIDE (P/N: 301607450) | 2 | PCS |
SEAL VARCO BEARING COVER F/ST 80 IRON ROUGHNECK (P/N: 301606260) | 6 | PCS |
SEAL VARCO HOUSING F/ST 80 IRON ROUGHNECK (P/N: 30160624) | 4 | PCS |
BEARING ROLLER VARCO F/ST 80 IRON ROUGHNECK (P/N: 3016073210) | 6 | PCS |
BEARING BALL VARCO F/ST 80 IRON ROUGHNECK (P/N: 301607330) | 2 | PCS |
BEARING VARCO F/ST 80 IRON ROUGHNECK (P/N: 301607340) | 2 | PCS |
RING, VARCO, LOCKING F/ST - 80 IRON ROUGHNECK (P/N: 301607374-0) | 6 | PCS |
SPARES KIT OPERATIONAL SSW40 SPINNING WRENCH. VARCO# 73109-12 (NOV# 373122 SL NO OF LIST 13 OF NOTIFICATION 2/24 | 1 | NOS |
BUTTON, SET CIRCULAR, 4-1/2-6 IN SLIP, VARCO[SL.NO.2/24 OF LIST 13] | 2 | SET |
VALVE, BALL, 3/8" NPT, FOR HYDRAULIC BX-500T ELEVATORS, VARCO P/N 979552-1(SL NO.2/24 OF LIST 13) | 1 | NOS |
MODULE, COPROCESSOR PROGRAMMABLE, VARCO P/N 20074876(SL NO.2/24 OF LIST 13) | 1 | NOS |
OILWELL DRILLING RIG SPARES : P/O 2013R-0909: VARCO SDXL 5 ROTARY HAND SLIPS | 1 | NOS |
SPACER MIDDLE 4 IN WASHPIPE VARCO 30123435 (OILWELL EQUIPMENT) | 6 | NOS |
WRENCH WASHPIPE 3 IN BORE VARCO 30150084 (OILWELL EQUIPMENT) | 1 | NOS |
SPACER LOWER 4 IN WASH PIPE TDS VARCO 30123436 (OILWELL EQUIPMENT) | 3 | NOS |
SPACER UPPER 4 IN WASH PIPE VARCO 30123434 (OILWELL EQUIPMENT) | 3 | NOS |
NIPPLE, GREASE, DRIVE TYPE STRAIGHT, VARCO | 13 | NOS |
BALL & SEAT LOWER IBOP EXT STOP LG BOR VARCO (P/N# 30177547) (OILWELL EQUIPMENT) | 1 | NOS |
SLEEVE VARCO CRANK UPPER/LOWER INTERNAL BLOW OUT PREVENTER FOR ID (P/N#904417) (OILWELL EQUIPMENT) | 2 | NOS |
PLUG VARCO 950768 PRESSURE FOR VARCO TOP (P/N#65021080) (OILWELL EQUIPMENT) | 6 | NOS |
TAG: