OILFIELD EQUIPMENT- U-BOLT.62 DIA VARCO
2015-07-25 10:30 Click：times
| Description | Quantity | Unit |
| DIE LOWER ST80 VARCO (P/N 30160382) (OILWELL EQUIPMENT) | 20 | NOS |
| DIE GRIP UPPER VARCO (P/N 30160380-500) (OILWELL EQUIPMENT) | 14 | NOS |
| CYLINDER, HYDRAULIC, VARCO | 1 | NOS |
| OILWELL SUPPLIES: (QTY :1 NOS) PO NO.10019723 JAW ASSEMBLY, LONG FOR HT-100, COMES WITH TEST CERTIFICATE VARCO 200072-1 | 144 | KGS |
| VALVE-CONTROL,VARCO,30171622500,REMOTE CONTROL | 1 | NOS |
| ELBOW,VARCO,8794912S,ELBOW 90 SWIVEL EXTENSION 37/SAE | 2 | NOS |
| RING,VARCO,30173757,LOAD,F/5 1/2 IN SDHL HANDSLIP | 4 | NOS |
| BEARING-ROLLER,VARCO,30160731,F/ST-80 IRON ROUGHNECK | 2 | NOS |
| ROLLER,VARCO,30160614,DRIVE,IRON ROUGHNECK | 2 | NOS |
| KIT-SEAL,VARCO,301606662,ASSY,F/ ST-80 ROUGHNECK | 4 | NOS |
| RING,VARCO,30160397,LOCKING,UPPER | 4 | NOS |
| PLATE,VARCO,30160393500,LH,LOWER F/ ST-80 IRON ROUGH NECK | 1 | NOS |
| RING,VARCO,30160745,SLIDE,F/ ST-80 IRON ROUGHNECK | 4 | NOS |
| KEY,VARCO,30160617,F/ ST-80 IRON ROUGHNECK | 2 | NOS |
| 5 NUM KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWER DOVETAIL 5-EA 50108-14- | 23.17 | KGS |
| 5 NUM KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DOVETAIL, 5 EA. 50108-8-CA | 42.83 | KGS |
| SENSOR-PROXIMITY, VARCO, 232389, F/PRS | 1 | NOS |
| OILWELL EQUIPMENT-VARCO BJ TYPE HGG 500 TON AIR OPERATED ELEVATOR C/W WEAR BUS HING, P/N:200059Y124 | 1 | NOS |
| OILWELL EQUIPMENT-VARCO BJ TYPE HGG 500 TON AIR OPERATED ELEVATOR C/W WEAR BUS HING, P/N:200059Y124 | 1 | NOS |
| WIRE LOCK /032 DIA UK 360FT US 364 FT PE VARCO | 1 | NOS |
| ASSEMBLY HYDRAULIC DRIVE/SHOTPIN ROT-LINK-ADAPTER VARCO | 1 | NOS |
| VALVE, PNEUMATIC, SOLENOID OPERATED, 4-WAY, 2 POSITION, VARCO | 1 | NOS |
| PIN-HINGE, VARCO, 30160612, SW HINGE PIN, F/ST-80 IRON ROUGHNECK - USA | 1 | NOS |
| PLATE, VARCO, 30160393501, RH, LOWER F/ST-80 IRON ROUGHNECK - USA | 1 | NOS |
| SHAFT, VARCO, 30173756, CENER-SLIP, PS-30 - USA | 1 | NOS |
| KIT-SEAL, VARCO, 30160662, ASSY, F/ST-80 ROUGHNECK - USA | 2 | NOS |
| RING, VARCO, 30160397, LOCKING, UPPER - USA | 2 | NOS |
| KIT-SEAL, VARCO, 30160624, HYD MOTOR, F/VARCO ST-80 ROUGHNECK - USA | 1 | NOS |
| RING, VARCO, 30173757, LOAD, F/5 � IN SDHL HANDSLIP - USA | 2 | NOS |
| RING, VARCO, 30160745, SLIDE, F/ST-80 IRON ROUGHNECK - USA | 2 | NOS |
| ROLLER, VARCO, 30160614, DRIVE, IRON ROUGHNECK - USA | 2 | NOS |
| BEARING-ROLLER, VARCO, 30160731, F/ST-80 IRON ROUGHNECK - | 2 | NOS |
| COUPLER, VARCO, 5590988S, ALVED, NIPPLE, QUICK DISCONNECT - CHINA | 2 | NOS |
| KIT-SEAL, VARCO, 901802, 90180-CYLINDER - USA | 2 | NOS |
| KIT, VARCO, 216954, 5-1/2 X 5 IN - USA | 2 | NOS |
| BEARING ANGULAR CONTACT VARCO (P/N 30153388) (OILWELL EQUIPMENT) | 1 | NOS |
| SCREW ENCODER LINK VARCO (P/N 30153436) (OILWELL EQUIPMENT) | 2 | NOS |
| SHAFT HOLLOW VARCO (P/N 30172931) (OILWELL EQUIPMENT) | 1 | NOS |
| SHEAVE 30T ALUMINUM AHS-100 VARCO (P/N 30176557-1) (OILWELL EQUIPMENT) | 2 | NOS |
| ASSEMBLY LINK VARCO (P/N 30180917-300) (OILWELL EQUIPMENT) | 1 | NOS |
| ENCODER ABSOLUTE HARSH ENVIRONMENT SEE TEXT VARCO (P/N 30155842-HE) (OILWELL EQUIPMENT) | 1 | NOS |
| SEAL INTERMEDIATE VARCO (P/N 30172438-103) (OILWELL EQUIPMENT) | 1 | NOS |
| SEAL OIL VARCO (P/N 30153304) (OILWELL EQUIPMENT) | 1 | NOS |
| RING RETAINING 1-1/4 IN VARCO (P/N 116920-125) (OILWELL EQUIPMENT) | 1 | NOS |
| HOLLOW SHAFT VARCO (P/N 30172931-1) (OILWELL EQUIPMENT) | 1 | NOS |
| PIN,ROLL,FOR SAFETY CLAMP,VARCO | 4 | NOS |
| PIN,COTTER,1/8 IN X 2IN LNG,ZINC PLATED STEEL,VARCO P/N | 100 | NOS |
| PIN, ROLLER, MHH / MECH / OPERATION, VARCO | 1 | NOS |
| OIL FIELD EQUIPMENT INS 2-3/8 X 3-1/2 VARCO 2160 ECCN #EAR9936 PCS PER SET | 3 | UNT |
| OIL FIELD EQUIPMENT INSERT 2-7/8 X 3-1/2 VARCO 2161 WCCN #EAR99 36 PCS PER SET | 3 | UNT |
| OIL FIELD EQUIPMENT INSERT 3-1/2 X 3-1/2 VARCO 2163-80112 ECCN #EAR99 36 PCS PER SET | 3 | UNT |
| OIL FIELD EQUIPMENT INSERT 4-1/2 X 3-1/2 VARCO 2163 ECCN #EAR99 54 PCS PER SET | 3 | UNT |
| OIL FIELD EQUIPMENT INSERT 4-1/2 X 4-1/2 VARCO 2165-80115 ECCN #EAR99 54 PCS PER SET | 3 | UNT |
| "INSERT 4-1/2 X 3-1/2 VARCO 21638431.43.8060; ECCN #EAR9954 PCS PER SET " | 3 | NOS |
| "INSERT 2-7/8 X 3-1/2 VARCO 21618431.43.8060; ECCN #EAR9936 PCS PER SET " | 3 | NOS |
| "INSERT 3-1/2 X 3-1/2 VARCO 2162-801128431.43.8060; ECCN #EAR9954 PCS PER SET " | 3 | NOS |
| "INSERT 2-3/8 X 3-1/2 VARCO 21608431.43.8060; ECCN #EAR9936 PCS PER BOX " | 3 | NOS |
| "INSERT 4-1/2 X 4-1/2 VARCO 2165-801158431.43.8060; ECCN #EAR9954 PCS PER SET " | 3 | NOS |
| BEARING, ASSEMBLY SHEAVE, VARCO P/N 20215982 | 2 | NOS |
| KIT, SEAL, 18-10M SBOP, VARCO | 1 | NOS |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: PIN-HINGE, VARCO, 200550 - MEXICO | 4 | NOS |
| NUT-HEX, VARCO, 50512C, SLTDUNC-2B - USA | 2 | NOS |
| BOLT, VARCO, 939099546, HANGER, FOR HT65 TONG - USA | 2 | NOS |
| MULTIPLIER, SIGNAL, VARCO, P/N 30171075 | 1 | NOS |
| OILFIELD EQUIPMENT- CRANK ASSEMBLY LINK-TILT PH-100 VARCO (P/N 30178241-500) | 1 | NOS |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: MANIFOLD-PIPE,VARCO,1197362,PIPE HANDLER MACH, ALUM PART NO 1197362 USA | 1 | NOS |
| IMPELLER, 4 X 3 X 13 OPEN. 1053944 (MFG./MFGR.PART NO.): NATIONAL OILWELL VARCO,L.P./H19206-54-30 | 2 | PCS |
| GASKET,I.B.BRG.COVER.1069419 (MFGR./MFGR.PART NO.): NATIONAL OILWELL VARCO,L.P/H20625 | 3 | PCS |
| GASKET KIT FLUID END.1053936 (MFGR./MFGR.PART NO.): NATIONAL OILWELL VARCO,L.P./641101076 | 6 | PCS |
| SEAL MECHANICAL.1069401 (MFGR./MFGR.PART NO.) NATIONAL OILWELL VARCO,L.P./H22451-1A | 5 | PCS |
| ASSEMBLY LUG JAW 13-3/8 IN HT -55 VARCO 200090-1JDE ITEM NO.1146856 (OILWELL EQUIPMENT) | 2 | NOS |
| ASSEMBLY LUG JAW 9 IN-10-3/4 IN HT -55 VARCO 200086-1 JDE ITEM NO.1146855 (OILWELL EQUIPMENT) | 2 | NOS |
| ELEVATOR SINGLE JOINT 5-1/2 IN BJ VARCO 7500Y132 JDE ITEM NO.1120868 (OILWELL EQUIPMENT) | 3 | NOS |
| ELEVATOR SINGLE JOINT 4-1/2 IN BJ VARCO 70500Y129 JDE ITEM NO.1120871 (OILWELL EQUIPMENT) | 3 | NOS |
| TONG MANUAL 7 IN TO 13-3/8 IN HT -55 VARCO 200560 JDE ITEM NO 1146852 (OILWELL EQUIPMENT) | 2 | NOS |
| ASSEMBLY LUG JAW 6-5/8 IN -9 IN HT -55 VARCO 200085-1 JDE ITEM NO.1146853 (OILWELL EQUIPMENT) | 2 | NOS |
| OILWELL EQUIPMENT 1 NUM VARCO INSERT BOWL FOR 16" CASING,20"CB CASING BUSHINGS AND HCS CASING SPIDERS | 406.52 | KGS |
| OILFIELD EQUIPMENT - VARCO BJ CARTRIDGE (94518-23HN) | 2 | NOS |
| SUB SAVER 7-5/8 REG RH X 5-1/2 FH RH C VARCO (P/N 91786-605) | 2 | PCS |
| RING SHOULDER FOR SPINNING WRENCH VARCO SSW-40(OILWELL EQUIPMENT) | 6 | NOS |
| CAPSCREW HEX HEAD UNC VARCO 5000612C5(OILWELL EQUIPMENT) | 6 | NOS |
| OILFIELD EQUIPMENT CABLE,VARCO SYSTEMS P/N PLCA-PLCB | 1 | NOS |
| CLAMP LINK/F VARCO TOP DRIVE (INDIANSHIP REGISTRY NO M-7392 DTD 16/01/2013) | 8 | NOS |
| CLEVIS ROD MODIFIED FOR VARCO TOP DRIVE (INDIANSHIP REGISTRY NO M-7392 DTD 16/01/2013) | 2 | NOS |
| RING, HOIST SWIVEL, VARCO PS/21 POWER SLIPS, VARCO (OLD P/N 979506-1) P/N 980473-1 | 2 | NOS |
| U-BOLT, FOR LINK TILT ON MODEL PH100 - 100 TON, VARCO P/N 30174023 | 2 | NOS |
| OILFIELD EQUIPMENT PIN,COTTER 1/8 IN X 3/4 IN SS VARCO FINGERBOARD DWG NO.93067 | 32 | NOS |
| OILWELL SUPPLIES: (QTY: 23 NOS) O-RING ,SEALING ,FOR VARCO TOPDRIVE TDS-4 APPLICTION | 3.03 | KGS |
| OILFIELD EQUIPMENT WASHPIPE, ASSY TDS VARCO | 1 | NOS |
| DIE,GRIPPING F/SAF CLAMP/VARCO | 12 | NOS |
| NUT, LOCK, COMMERCIAL THIN TYPE, VARCO BJ P/N 944422-6 | 236 | NOS |
| NUT, LOCK, COMMERCIAL THIN TYPE, VARCO BJ P/N 944422-6 | 10 | NOS |
| OILFIELD EQUIPMENT- PIN HINGE VARCO 200204 F/SDD ELEVATOR AND TONG | 6 | NOS |
| OILFIELD EQUIPMENT- KIT VARCO SFT LOWER LARGE BORE | 1 | NOS |
| OILFIELD EQUIPMENT- SPRING COMPRESSION VARCO | 1 | NOS |
| OILFIELD EQUIPMENT- FILTER ELEMENT PRESSURE VARCO | 2 | NOS |
| OILFIELD EQUIPMENT- CRANK ASSEMBLY EXTERNAL VARCO (P/N# 30173893 ) | 2 | NOS |
| OILFIELD EQUIPMETN- FAN OIL COOL HE UL TD5-4 VARCO | 2 | NOS |
| OILFIELD EQUIPMENT- U-BOLT.62 DIA VARCO | 4 | NOS |
| OILFIELD EQUIPMENT- BRACKET LINK PH100 VARCO | 2 | NOS |
TAG：